Swaging machines
-Please contact us by e-mail, telephone or by Fax for more details
of the products and services described in this web site.
Banner Fluid Power produce a wide range of special purpose swaging machines, crimping machines suitable for high speed production, distributor and workshop use, 12 volt mobile machines, hose cutting machines and skiving tools for hydraulic hose assembly, control cable and wire rope, tubular component assembly, bullet swaging and nut crimping.
The new tabletop BS 24 - 40 swaging machines, are probably the most cost effective answer for your maintenance and distributor swaging machine requirements around today. This ruggedly constructed machine is available in both 4kw x 3ph and 2.2kw x 1ph versions and comes complete with 7 sets of standard dies, all kept in a sturdy purpose made toolbox and is suitable for up to most -20 (DN 32) 4SP assemblies. The sealed machine arrives filled with oil and is ready for use.
The ‘snap in’ radially closing dies provide over 30mm clearance when the machine dies are fully open, allowing access for most bent stem and other manipulated fittings. Extra dies are available to increase the swaging capacity, allowing the assembly of smaller bore and at the other end of the scale, -24 and -32 (DN 50) wire braid hose assemblies. A wide range of one piece flared type dies and other special purpose dies are also available.
The direct reading micrometer type gauge allows rapid setting of the powerful 80 tonne, double acting fully enclosed ram, that is capable of providing over 300 tonnes when expressed as radial effort on the dies. The push button controls on the swaging machines include an automatic stop facility at the preset size. The 24 volt safety control circuit also features a "set size reached" indicator light and an emergency stop button. Each control circuit is separately fused and these are easily accessed via the removable end panel. To reduce maintenance downtime to a minimum, all the modular "plug in" components including the setting gauge, hydraulic control valve and related solenoids, can be removed for servicing purposes and replaced in minute.