Wire rope assembly
-Please contact us by e-mail, telephone or by Fax for more details
of the products and services described in this web site.
Here at Banner Fluid Power we are also able to design and produce a whole range of swaging machines to be used for special purposes , we can also create crimping machines that are suitable for high speed production, distributor and workshop use, 12 volt mobile machines, hose cutting machines and skiving tools for hydraulic hose assembly, control cable and wire rope assembly, bullet swaging and nut crimping.
The "snap in" radially closing dies on the wire rope assembly machines are able to provide you with over 30mm clearance when and if the the machine dies are fully open, which in turn allows access for most bent stem and other manipulated fittings. We have made sure that extra dies are available to increase the swaging capacity, allowing the assembly of smaller bore and at the other end of the scale, -24 and -32 (DN 50) wire braid hose assemblies. A wide range of one piece flared type dies and other special purpose dies are also available. The direct reading micrometer type gauge allows rapid setting of the powerful 80 tonne, double acting fully enclosed ram, that is capable of providing over 300 tonnes when expressed as radial effort on the dies. The push button controls include an automatic stop facility at the preset size. The 24 volt safety control circuit also features a "set size reached" indicator light and an emergency stop button. Each control circuit is separately fused and these are easily accessed via the removable end panel on the wire rope assembly facilities.
We are very proud of all the wire rope assembly facilities that we are able to provide, we are the forefront of the design and implication of these type of products, so if you need further information then please feel free to contact us and we will be more than willing to discuss any dimensions that you need to know with regards to the machines and give you full specifications.